You Can Judge A Cab by It’s Cover
The box is finished. Just 3 months shy of 3 years from inception and we finally have a cabinet to start putting things on and in! Woot!
Thinking IN the box…
Well, last night we glued up the Cowboy Arcade cabinet! It went really well and all the planning and care taken to this point paid off in a great final […]
Almost there…
Worked for about 4 hours on the cabinet at Bryce’s shop today! We are getting very close. Here is the back of the marquee box glued up: Then the whole […]
Going great guns
A little more progress has been made. We had a little set back in terms of time to work on the cabinet, but got back to it this past week. […]
Salvation Is At Hand
I woke up this morning thinking, “I know how to fix this.” And by “this” I mean the problem of the joystick bases not fitting in the recesses that we […]
Cuts Like A Knife
Got some more work done at Reid’s this afternoon. Cut the second side and the top of the cab… We also cut the control panel. This required cutting the through […]
Spinning and Winning
I have to admit that I have as much fun doing the detailed planning and making the parts for this MAME cab as anything. Finished up the spinner today. The […]
Go Pokes!
Today is the start of football season. While I am not a really big sports fan per se, I am a HUGE Oklahoma State Cowboy’s fan. So, in celebration of […]
The First Cut Is The Deepest
Went to Reid Cabinetry today and cut some wood! We were a little short on time so we only cut one side and some of the internal pieces, but it […]
Shiny = Good
Button mounts are finished and ready to go to the platers: Mounts without switches in them…. Mounts with switches installed… They will be hard anodized black before they are completely […]